Analog Input Type Setup

For information about ensuring that the jumper is set up properly on a 4-20mA input, please see the Analog Inputs section.

Analog Input Type – allows the operator to choose from the following parameters for each input of the VR recorder:

 

Thermocouple Input Types

B	C	E	J	K
N	NNM	R	S	T

Voltage Input Types

0 – 2.56	0 – 1.28	160 mV	80 mV	40 mV
20 mV

 

Current Input Types

4-20mA   124 ohms *Future Use

4-20mA     62 ohms

Note – The 4-20 mA 124 ohms option is currently reserved for future use.  Currently, when using a 4-20 mA input, be sure to select the 4-20 mA 62 ohms option.  For information about ensuring that the jumper is set up properly on a 4-20mA input, please see the Analog Inputs section